How To Repair Iphone 4s Lock Button Not Working After Screen Replacement (Solved)

Home > Iphone 4s > Iphone 4s Lock Button Not Working After Screen Replacement

Iphone 4s Lock Button Not Working After Screen Replacement

Contents

Let's face it.  These beautiful iPhones can… DIY KIT Apple iPhone 5C Screen Replacement (Black) $67.49 Add to cartQuick View Here's what you get: iPhone 5C LCD/Digitizer (Black) DIY iPhone I noticed that when the screen was on a color, it showed static lines and pixel things but not when on a black or white screen. As the rest of the device works normally, we suggest just using the phone as is, and begin looking into getting a different device. If this also does not fix the issue, then you may have a motherboard that has sustained some type of damage. have a peek here

Seems to be a bad digitizer if you replace the Display unit. If your internal software has been corrupted, resetting your device to factory defaults should fix this issue. Rating is available when the video has been rented. Unclip the top logic board cables & remove the rear-facing camera Using your spudger or pry tool carefully disconnect all the cables at the top of the logic board.

Iphone 4s Power Button

Was this answer helpful? Reply Doctor Dan June 25, 2014 Thanks Daithi Dorney, Sounds like your battery has come disconnected from your device, or just needs replacement. From memory you need to place that part carefully onto the screw hole before securing the battery cable onto its slot on logic board. More DIY help Want to know how to perform another type of iPhone repair or modification?

Don't bend the battery. You can either use an opening tool to pry up the rear panel or try your fingers to pinch the rear penl. There is a little clip under the connector, be careful for not losing it when you remove the connector. Icloud If you open up your device, you should be able to plug your digitizer cable back in, and everything should be good to go.

Any clue? Iphone 6 Won't Turn On After Screen Replacement Not covering the entire 2 sensors. Push the rear panel toward the top edge of your iPhone 4 with a little strength until you see it removes about 2mm. https://www.ifixit.com/Answers/View/164679/Lock+button+not+working+after+screen+replacement Again, if you have an all white screen on your device, this is seldom related to a bad screen.

I have verified everything is well seated. Was this answer helpful? This fee will cover any troubleshooting that needs to be done on your device. Thanks.

Iphone 6 Won't Turn On After Screen Replacement

The phone now starts up fine & the apple logo appears but the touch screen function is unresponsive.

Your only option will be to seal up your phone using your broken screen, and contact Apple regarding an out of warranty replacement. Iphone 4s Power Button Reply Geovani Flores June 03, 2014 Hello, I replaced the screen on an iphone 4 from verizon and now the iphone won't turn on. Iphone 4s Power Button Not Working If you would like a diagnostic test on your phone, simply fill out the short form at: www.phonedoctors.com/mail Reply Jordan L June 22, 2014 I recently got my iPhone

After the restore, complete any updates you need through iTunes, and NOT through your network or WiFi. http://pixelzs.com/iphone-4s/iphone-4s-unlocked-sms-not-working.html Now the parts will not work. Section 15-1. Cancel Dave Rep: 1 Posted: 12/10/2012 Options Permalink History Well i wouldnt say its too hard but i repair them for a living. Itunes

thanx again November 4 by smartrepairs IOS 10 location of Auto-Lock and Lock / Unlock are located in the following location. If your device will only turn on when you plug it into a USB cable, then this is a strong possibility. The screen flex cable has metal inside it. Check This Out I do have to note that the OP's Mod is still in place to that may be part of the solution.

After removing it you'll also notice a gold grounding clip underneath it. The best way to describe it is the picture keeps moving/shifting rapidly up and down kind of like an old CRT degaussing itself (minus the color distortion). How to fix a stuck or broken power button in a GSM/AT&T iPhone 4 More DIY help & how to's Whether you aren't sure if these are the repairs you need

This is getting annoying!

i changed the screen on my iphone 4s. It's also worth considering that opening up your device to perform any repair or modification can and will void your Apple warranty. any other ideas? Will eventually do damage if not. 04/14/2012 by Dave Add a comment 0/1024 Cancel Post comment Are you sure you want to delete this zzzzzz?

Have tried soft reset which didn't work. Use spudger to pull the Wi-Fi retaining clips away from the inner frame. The parts that are loose, are then able to move around more, and reveal the main damage after repair. this contact form And then remove the dock connector cable cover.

Reply Steven February 01, 2014 Hi, I recently changed my screen, and now it won't come on without being on charger; even then all it shows is a blinking Yes No Voted Undo Score -1 Cancel Comments: I have an ipad mini 4 as well. What you'll need to DIY replace an iPhone 4S power button cable We recommend using only quality and genuine parts from a reputable supplier like eTech Parts. If they will not, you can bring your device to any of our locations, or mail in your device.

Is there a solution for my problem. If not i order from Hong Kong and wait anywhere up to 4 weeks. If after a good restore if the phone is still exhibiting the cloudy screen while on the charge randomly, contacting apple would be mt next step.